Protectcoat Anti graffiti coating

Interior coating

vinkje 35  Colour refit

vinkje 35  1 compound

vinkje 35  High quality

vinkje 35

  Has been approved by the Deutsche Bahn AG!

 

Request a quote

 

 

Description

Anti graffiti coating has been approved by the Deutsche Bahn AG!

Interior Coating is a clear, permanent and a 1 compound anti-graffiti coating.
The coating is suitable for painted plastic surfaces etc. 
The Interior Coating is a high quality coating and has been approved by the Deutsche Bahn AG. The anti graffiti coating offers a long lasting protection of 8-10 years. Removing ink, graffiti, posters etc. is very easy. The coating has a good chemical, scratch and weather resistance.

Interior Coating has been approved by the Deutsche Bahn AG!

Advantages

The advantages of the Interior Coating. 

  • Permanent coating.
  • 1 compound.
  • UV resistant.
  • Good scratch resistance.
  • Low maintenance costs.
  • High efficiency.
  • Tested and meets the requirements of the Deutsche Bahn AG.

Use

 Interior Coating can be applied to painted surfaces such as:

  • Plastic
  • Inside of rolling stock etc.

Application

Application

  • Apply Interior Coating with a clean microfiber cloth or a melamine sponge.
  • The product must not be exposed to frost. The surface must be dry, dust-free and clean.
  • Apply a thin layer of approximately 5 μm.

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Productcode         1067227500
Product colour         Clear
Dilution         No
Coverage rate         125-150m²/liter.
Application tools         Microfiber cloth, melamine sponge
Storage         Store in dry conditions at temperatures between 5°C - 30°C
Shelf life         12 months in orginal sealed container
Processing temperature         5°C - 30°C
Processing temperature Surface         5°C - 25°C
Container         500 ml
Drying time:         Based on +- 20°C
Dry         approx. 20 minutes
Dry on surface         approx. 120 minutes
Hardened         approx. 12 hours 

 

Downloads

Productinformatieblad           Veiligheidsblad
PDF Protectcoat TDSTDS            PDF Protectcoat TDS MSDS