Nordic Swan 
Eco-
ISO 14001 
High quality
Colour refit
Restores weathered and dull surfaces
1 compound
High quality
Description
The coating restores weathered and dull surfaces! Colour Refit coating
Protectcoat Colour RC (Refit Coating) is a sustainable colour restorer. The coating restores weathered and dull surfaces. Protectcoat Colour RC is a high quality, 1 compound coating that is suitable for painted metals, plastics and powdered surfaces. The coating has a good chemical and scratch resistance and has a high weather resistance. The Protectcoat Colour RC offers a long lasting protection of 8-10 years (tapering).
Advantages
The advantages of the Protectcoat Colour RC:
- Permanent coating.
- 1 compound.
- UV resistant.
- Good scratch resistance.
- Low maintenance costs.
-
High efficiency.
Use
Protectcoat Colour RC can be applied to painted surfaces such as:
- Metal
- Plastic frames
- Trespa, cladding panel
- Garage doors
- Aluminium etc.
Application
Application
- Apply Protectcoat Colour RC with a clean microfiber cloth or a melamine sponge.
- The product must not be exposed to frost. The surface must be dry, dust-free and clean.
- Apply a thin layer of approximately 5 μm.
Recommendation
Always read the description before use. (See downloads)
Always carry out a test first to ensure the finished result is acceptable.
KEEP OUT OF THE REACH OF CHILDREN!
Product information
| Productcode | 1067219100 | ||||
| Product colour | Clear | ||||
| Dilution | No | ||||
| Coverage rate | 125-150m²/liter. | ||||
| Application tools | Microfiber cloth, melamine sponge | ||||
| Storage | Store in dry conditions at temperatures between 5°C - 30°C | ||||
| Shelf life | 12 months in orginal sealed container | ||||
| Processing temperature | 5°C - 30°C | ||||
| Processing temperature Surface | 5°C - 25°C | ||||
| Container | 100 ml | ||||
| 500 ml | |||||
| Drying time: | Based on +- 20°C | ||||
| Dry | approx. 20 minutes | ||||
| Dry on surface | approx. 120 minutes | ||||
| Hardened | approx. 12 hours |
