Protectcoat anti graffiti coating

Protectcoat AG60 Coating

vinkje 35  Eco friendly coating

vinkje 35  Clear coating

vinkje 35  There are no chemicals removers needed

 

 

Request a quote 

 

 

 

Description

Anti graffiti coating | Semi-Permanente anti graffiti coating.

Protectcoat AG60 Coating is a clear and semi-permanent anti graffiti coating. Protectcoat AG60 Coating is an eco-friendly polysacharide-based coating. This anti graffiti coating can be used on most types of hard non-absorbent surface such as steel containers, glass, pastic etc.. To remove future graffiti only use warm water, no chemical removers. In case of using a pressure washer, there is new coating needed. The lifetime is 3-5 years, depending on the surface and environment.

Advantages

The advantages of the Protectcoat AG60 Coating:

  • Protectcoat AG60 Coating is a clear coating.
  • Eco friendly coating
  • Permeable
  • Graffiti can be removed quick and easy by using warm water.
    There are no chemicals needed.

Use

 Protectcoat AG60 Coating can be used on:

  • Glass
  • Plastic
  • Hard non-absorbent surface etc.

Application

Application

  • The surface must be dry, dust-free and clean.
  • Shake the product before use.
  • Apply the anti graffiti coating with a roller or a paint sprayer.
  • Makes sure the entire surface is covered.
  • The anti graffiti coating should be applied in 2 layers.

  • Dry time:
  • First layer: 30 min. - 60 min.
  • Second layer: 120 min. - 180 min.

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Productcode         106722615
Product colour         Clear
Dilution         No
Coverage rate         0,5m²/liter.
Application tools         Roller, paint sprayer
Storage         Store in dry conditions at temperatures between 5°C - 30°C
Shelf life         12 months in orginal sealed container
Processing temperature         5°C - 25°C
Processing temperature Surface         5°C - 25°C
Container         15 liter
Dry time         Depending on the temperature, layer ticknesses and environment
First layer         30 min. - 60 min.
Second layer         120 min. - 180 min.

 

Downloads

PDF Protectcoat TDS 
Technical Data Sheet