Protectcoat AG50 Coating

Description

Anti graffiti coating | Semi-Permanente anti graffiti coating.

Protectcoat AG50 Coating is a clear and semi-permanent anti graffiti coating. Protectcoat AG50 Coating is an eco-friendly polysacharide-based coating. This anti-graffiti coating can be used on various absorbent surfaces such as: concrete, brick, granite, etc. To remove future graffiti, ink or glue, it requires only hot water under appropriate pressure. In case of using a pressure washer, there is new coating needed. The lifetime is 3-5 years, depending on the surface and environment.

Advantages

The advantages of the Protectcoat AG50 Coating:

• Protectcoat AG50 Coating is a clear coating.
• Eco friendly coating
• Permeable
• Graffiti can be removed quick and easy by using warm water.
  There are no chemicals needed.
  
  

Use

 Protectcoat AG50 Coating can be used on:

• Concrete
• Brick
• Granite
• Absorbent surfaces etc.

Application

Application

• The surface must be dry, dust-free and clean.
• Shake the product before use.
• Apply the anti graffiti coating with a roller or a paint sprayer.
• Makes sure the entire surface is covered.
• The anti graffiti coating should be applied in 2 layers.
  
  
• Dry time:
• First layer: 30 min. - 60 min.
• Second layer: 120 min. - 180 min.
  
  

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Downloads

Technical Data Sheet