Protectcoat anti graffiti coating

Protectcoat AG10 Coating

vinkje 35  1K (single) coating

vinkje 35  Clear and permanent

vinkje 35  There are no chemicals removers needed

 

 

Request a quote 

 

 

 

Description

Permanente 1K (single coating) anti graffiti coating.

Protectcoat AG10 Coating is a clear, permanent and 1 compound coating. It offers protection against graffiti, ink, markers, posters, stickers etc. The anti graffiti coating can be applied to various surfaces such as concrete, bricks, wood etc. To remove future graffiti, ink etc. you only need to use warm water under appropriate pressure. There are no chemicals removers needed.

Advantages

The advantages of the Protectcoat AG10 Coating:

  • Protectcoat AG10 Coating is a single coating.
  • The anti graffiti coating is a clear and permanente coating.
  • UV-resistent.
  • Water-repellent.
  • Graffiti can be removed quick and easy by using warm water.
    There are no chemicals needed.

Use

 Protectcoat AG10 Coating can be used on:

  • Wood
  • Concrete
  • Plaster walls
  • Bricks
  • Metal etc.

Protectcoat Anti Graffiti Coating

 

Application

Application

  • Please note: on smooth surfaces (tiles, metal etc.) a primer must be applied beforehand.
  • The surface must be dry, dust-free and clean.
  • Shake or stir the product before use.
  • Apply the anti graffiti coating with a roller or a paint sprayer.
  • Makes sure the entire surface is covered.
  • Let the coating dry for 24-48 hours.

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Productcode         1067210
Product colour         Clear
Dilution         No
Coverage rate         2-4m²/liter. In case of an absorbent surface.
          5-8m²/liter. In case of a non-absorbent surface.
Application tools         Roller, paint sprayer
Storage         Store in dry conditions at temperatures between 5°C - 30°C
Shelf life         12 months in orginal sealed container
Processing temperature         -4°C - 25°C
Processing temperature Surface         -4°C - 25°C
Container         10 liter
Dry time         Depending on the temperature, layer ticknesses and environment
Hardened         Approx. 24h - 48h

 

Downloads

PDF Protectcoat TDS 
Technical Data Sheet