Protectcoat EFR

Description

Removes cement and morter stains, efflorescene, limescale etc.

Protectcoat EFR removes very effectively cement and mortar stains, efflorescene, limescale and other dirt from brickwork. The cement and mortar remover can be applied on various surfaces such as bricks, facades, concrete etc. Protectcoat EFR is nog aggressive, it does not contain hydrochloric acid and is therefore a good alternative for strong hydrochloric acid products. This product is also biodegradable and environmental friendly.

Advantages

The advantages of the Protectcoat EFR:

• Highly effective and fast acting.
• Contains no aggressive acids.
• Does not release vapours and is free from hydrochloric acid.
• Environmental friendly.
• 70% more effective than phosphoric acid and citric acid.

Use

 Protectcoat EFR can be used on:

• Stone
• Concrete
• Facades
• Bricks
• Metal etc.

Application

Application

• If necessary, cover all surfaces not to be treated. Surfaces to be treated, should be wetted first.
• Apply Protectcoat EFR with a roller, brush or a low pressure sprayer.
• Allow the product to dwell for 3 – 5 minutes, depending on the dirtiness
• Then apply another layer and let the product dwell for another 3 – 5 minutes.
• If necessary, use a brush to treat the stains and dirt. Note: do not use steel bristles.

• Rinse the entire surface under appropriate pressure.

• The product can be diluted.

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Downloads

Technical Data Sheet